MV1439 Power Factor Control Unit

Description

Background

Terco Power Factor Controller is a module within our MV-program.

With the PFC you can minimise the currents caused by reactive losses of power and thereby optimising the transfer of energy between generation and loading. This is becoming more and more important today when “Saving energy” is vital in a world with focus on pollution and shortage of energy.

Field of application

Inductive or mixed inductive and resistive networks in need of compensation, for example when starting and running induction motors.

Principles of operation

Depending on the power factor of the loading network a microprocessor will connect groups of capacitors.

By measuring phase voltages and current the microprocessor will calculate how many capacitive groups that has to be connected and also in which combinations.

Electrical details

Number of 3-ph groups

6

Power factor setting

0.7 inductive to 0.7 capacitive

Nominal voltage

3 x 230 V 50 – 60 Hz Code no. MV 1439-235

 

3 x 400 V 50 – 60 Hz Code no. MV 1439-405

Nominal power

0 – 2 kVAr cap.

PF-Controller

Automatic or manual 

Adjustable delay times, switching sequences and strategies

Monitoring and

Measurement on

the controller

Voltage, Current and Power factor

Switching modes

Linear and circular

Indication lamps

Indication lamps for the capacitor groups which are connected

Physical design

The Power Factor Control Unit is housed in a sturdy apparatus box with a clear mimic diagram explaining how to connect the supplying net from the left to the right side where the network in need for power factor compensation is connected.

Readings, parameters and sub parameters are indicated on the front of the controller. Other settings and programming than the defaults are simply performed from the keyboard and displayed on the controller front.

General data:

Power supply

1-ph 220 – 240 V, 50 – 60 Hz

Dimensions

510 x 570 x 280 mm

Weight

24 kg

Typical Experiments with Terco PFC:

  • The concept of active power, apparent power and reactive power
  • The concept of power factor and “cos”
  • The concept of measuring methods
  • Start current settings (C/k)
  • Delay times
  • Efficiency and losses
  • Linear and circular switching modes
  • PF-Controller design and schematics
  • Programming the controller
  • PF-Controller and resistive/inductive loads
  • PF-Controller and induction motor loads
  • Control range limits

Block schedule

Electrical Machines Laboratory